Welcome, Guest. Please login or register.

Login with username, password and session length
ArdweeNET forum

Pages: [1]
Author Topic: Cabling/connectors  (Read 3372 times)
0 Members and 1 Guest are viewing this topic.
Jr. Member
Posts: 55

View Profile WWW
« on: March 08, 2011, 01:52:40 PM »

I have changed the cabling from "any 3-core wire" to the following

  • The default connector is RJ11 6/6.
  • The wiring is "centre out", therefore 4/4 can be used for tiny Nodes and 8/8 can also be used for more current-carrying ability.
  • Nodes will have diode bridges for the power and be able to auto detect/correct the signal polarity, this allows the use of crossover or straight cables with no thought about what plugs into what.

See this thread


for some discussion about options and some insight into the decision process.

« Last Edit: March 12, 2011, 12:31:29 PM by Graynomad » Logged

Rob, aka the GRAYnomad
Pages: [1]
Jump to: